Wednesday, January 15, 2025
BlogFeatured

Νέα υβριδική φωτογραφική μηχανή Instax Mini Evo ανακοίνωσε η Fujifilm

Η Fujifilm ανακοίνωσε την Instax Mini Evo, μια νέα ψηφιακή φωτογραφική μηχανή που εκτυπώνει σε φιλμ Instax Mini. Η εταιρεία το περιγράφει ως μια νέα ναυαρχίδα του Instax που έχει «σχεδιαστεί με μια premium και κλασική πινελιά» και έχει πολλά ρετρό στοιχεία, όπως καντράν τοποθετημένα στο επάνω μέρος και χειριστήριο εκτύπωσης που λειτουργεί σαν μοχλός προώθησης φιλμ.

Όπως και άλλες υβριδικές κάμερες Instax, η Mini Evo διαθέτει οθόνη LCD για να σας βοηθά να πλαισιώνετε τις ψηφιακές σας λήψεις πριν από την εκτύπωση. H Mini Evo περιλαμβάνει δέκα εφέ φακού που μπορούν να συνδυαστούν και να εφαρμοστούν σε φωτογραφίες και η Fujifilm λέει ότι έχει διπλάσια ανάλυση έκθεσης από τα προηγούμενα μοντέλα.

 

H Mini Evo λειτουργεί επίσης ως εκτυπωτής Instax, που σημαίνει ότι μπορείτε να εκτυπώσετε εικόνες από το smartphone σας ασύρματα. Επίσης, η Fujifilm έχει προσθέσει μια νέα δυνατότητα που σας επιτρέπει να αποθηκεύετε εκτυπωμένες φωτογραφίες Mini Evo στο τηλέφωνό σας με ενσωματωμένα πλαίσια Instax, ώστε να μπορείτε να τις κοινοποιείτε ως ψηφιακά στιγμιότυπα Instax.

Η Fujifilm θα κυκλοφορήσει το Instax Mini Evo στην Ιαπωνία στις 3 Δεκεμβρίου. Στις ΗΠΑ θα φτάσει μέχρι τον Φεβρουάριο. Θα κοστίσει 199,95 $.

Περισσότερα για την Instax Mini Evo:

1. Camera Function

  • Image sensor
    1/5-inch CMOS with primary color filter
  • Number of recorded pixels
    2560 x 1920
  • Storage media
    Internal memory, microSD/microSDHC memory card
  • Storage capacity
    Approximately 45 images in internal memory,
    approximately 850 images per 1 GB in microSD/microSDHC memory card
  • Recording method
    DCF compliant Exif Ver 2.3
  • Focus distance
    f = 28 mm (35-mm film equivalent)
  • Aperture
    F2.0
  • Auto focus
    Single AF (with AF Illuminator)
  • Shooting distance
    10 cm to ∞
  • Shutter speed
    1/4 second to 1/8000 second (automatic switching)
  • Shooting sensitivity
    ISO100 to 1600 (automatic switching)
  • Exposure control
    Program AE
  • Exposure compensation
    −2.0 EV to +2.0 EV (1/3 EV step)
  • Metering method
    TTL 256 split metering, multi metering
  • White balance
    Auto, Fine, Shade, Fluorescent 1, Fluorescent 2, Fluorescent 3, Incandescent
  • Flash
    Auto flash / Forced flash / Suppressed
    flash
    Shooting range with flash: Approximately
    50 cm to 1.5 m
  • Self-timer
    Approximately 2 seconds / approximately 10 seconds
  • Image effects
    10 lens effects, 10 film effects
    Total of 100 effects by multiplying above

2. Print function

  • Exposure Print pixel count
    1600 x 600 dots
    (800 x 600 dots when printed from smartphone app)
  • Exposure resolution
    25 dots / mm x 12.5 dots/ mm
    (638 x 318 dpi, 40 x 80 μm dot pitch)
    12.5 dots / mm when printed from smartphone app
    (318 dpi, 80 μm dot pitch)
  • Exposure gradation
    RGB gradation of 256 colors
  • Printable image format
    JPEG images taken with this unit
  • Print output time
    Approximately 16 seconds
    * Plus 7 seconds when printed using instax-Rich Mode immediately after startup.
  • Print function
    Images in the internal memory and images in the memory card can be printed
  • Reprint
    Reprint is possible for images stored in print history (up to 50)

3. Other

  • Smartphone app linked functions
    Smartphone image print function, remote shooting function,
    printed image transfer function, firmware upgrade function
  • LCD screen
    3.0-inch TFT color LCD screen
    Pixel count: Approximately 460,000 dots
  • External interface
    Micro USB Micro-B (for charging only)
  • Power supply
    Lithium ion battery (internal type: not removable)
  • Charging function
    Built-in
  • Possible number of printed images
    Approximately 100 (from full charge)
    * The number of prints depends on the usage conditions.
  • Charging time
    Approximately 2 to 3 hours
    * Charging time depends on the temperature.
  • Main unit dimensions
    87 mm x 122.9 mm x 36 mm (excluding projecting parts)
  • Main unit weight
    Approximately 285 g
  • Operating environment
    Temperature: 5℃ to 40℃
    Humidity: 20% to 80% (no condensation)
  • Film used
    FUJIFILM instant film “instax mini” (sold separately)
Spread the love